- Microcomputer control system for the convenience of user
- High efficiency and energy savings. Water temperature will fall down quickly and economically
- Utilizes the Freon-free R134a refrigerant gas, which is safe and environment friendly (non oZone depleting)
- Anti-corrosive pure titanium evaporator for fresh & sea water dual use
- Temperature memory system that makes the chiller refrigerate continuously according to the previous temperature when the power is supplied again to protect the animals and plants in the aquarium.
- Fantastic price point for those seeking a value-for-money product.
- Practical designing and durable materials used contribute to a long lasting, functional product meeting the needs of aquarist
What is R134a Refrigerant?
R134a refers to the refrigerant gas used in chiller/air condition compressors.
It is a common refrigerant that is used in many air conditioning applications.
Due to the nature of R134a properties which is of a HFC (hydrofluorocarbon) refrigerant, it does not have any ozone depletion potential and has little greenhouse effect.
Directions for Use:
- During/after transporting and/or fixing up the chiller, allow it to stand upright for at least 3-6 hours before powering it up. This reduces unnecessary damage by allowing the oil and fluid to flow back into the compressor.
- Do not place the chiller outdoors or near any heat source.
- Do not place the chiller in enclosed cabinets.
- Place the chiller approximately 30cm away from walls to facilitate ventilation.
- Do not cover the chiller while it is in operation as this will cause over-heating.
- For use with marine setups, it is recommended to install the chiller after the filtration systems. This is to ensure the durability and function of the evaporator.
- Regular maintenance of the circulating systems, front draft hood and air filters are advised at once every month.
- For troubleshooting of issues such as not being able to power on the unit, faulty powering issues, lack of refrigeration, or loud noises / vibration from the unit. Please refer to the instructions booklet for suggestions on basic problem solving.
Provided Accessories and Attachments:
- 2x Elbow adaptors,
- 2x Inlet and outlet rubber covers,
- 2x Metal hose clamps,
- 2x Spare adaptor rubber stoppers/seals
- 1x Fuse,
- 1x Instruction booklet,
Technical Data
Model: HS28A
Iced Medium: R134a
Voltage: 220-240V
Frequency: 50Hz(60Hz)
Power: 1/10HP
Recommended Tank Size: 150L
Pump Water Flow: 250-1200l/h
Size: 400 x 218 x 415mm
Adaptor Diameter: 12mm & 16mm
Weight; 15kg
Model: HS66A
Iced Medium: R134a
Voltage: 220-240V
Frequency: 50Hz(60Hz)
Power: 1/4HP
Recommended Tank Size: 300L
Pump Water Flow: 1000-2500l/h
Size: 435 x 295 x 470mm
Adaptor Diameter: 16mm & 19mm
Weight; 18.6kg
Model: HS90A
Iced Medium: R134a
Voltage: 220-240V
Frequency: 50Hz(60Hz)
Power: 1/2HP
Recommended Tank Size: 500L
Pump Water Flow: 1200-3000l/h
Size: 460 x 320 x 590mm
Adaptor Diameter: 16mm & 19mm
Weight; 22kg
*When moving the chiller, always transport the chiller upright.
*After transport, and fixing up the chiller, allow it to sit for at least 3-6 hours before powering it up. This will allow the oil and fluid to flow back into the compressor and reduce chances of unnecessary damage.
